My sons and I built this 6 shelf lazy susan pantry cabinet into the closet.

We bought two 4 by 8 foot by 3/4 inch oak panels, and cut each panel into four 2 by 4 foot pieces. We needed six pieces to make the six shelves. We cut them to fit inside the pantry closet by using our template as a guide.

We transfered the template design onto one of the 2 by 4 foot plywood pieces. We used the center point of the door as the pivot point for the router to route out a 14.375 inch radius half circle out of the plywood to make the back shelf. We then shortened the radius of the router to 13.625 inches to make the half circle 3/4 of an inch smaller so that it would easily fit into the half circle of the back shelf.

We added a 1.5 by 1/4 inch oak lip around front of the back shelves and the half circle shelves so that food items would not fall off as the lazy susan is rotated.

We fabricated a pivot post out of three 1 by 4 inch by 8 foot oak boards. The three boards were glued together as a 3 by 3 inch post 8 foot long. We drilled 5/8 inch hole in the bottom end 3 inches deep and fit a 4 by 5/8 inch steel rod in it and drilled a 5 inch deep hole for the top and placed a 7 by 5/8 inch steel rod in the top hole. The lazy susan pivots around these rods which are anchored in the floor at the bottom by a thrust bearing which we made and to the inside wall of the pantry closet at the top with a pillow block bearing.

We then mounted three 70 inch double track standard rails to the post on three sides. These rails were used to mount three sets 11 inch double track brackets for the half circle shelves to sit on. We cut a notch into each half circle shelf so that they would fit around the 3 by 3 inch post and rails snugly.

I sanded, stained and varnished all the pieces for the lazy susan pantry cabinet shelves. We then took them inside to the pantry closet for final assembly. We placed the back shelves in the closet first and then mounted the pivot post in the thrust bearing on the floor and attached it to the wall with a 5/8 inch pillow block bearing. We placed the half shelves on the brackets of the pivot post.

We tested the lazy susan pantry cabinet to make sure it would pivot around the center post and not hit the back shelves. It worked and it is easy to get to all of the stored items on the back shelf and all the items on the lazy susan pantry cabinet as it swings out for easy access. My wife loves it.